Part Number Hot Search : 
CY2272 MAX427 A2030 2424D DG413DJ LT555 81NJ250 MAX3095
Product Description
Full Text Search
 

To Download T6K34 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 T6K34
Preliminary
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
T6K34
Row Driver LSI for Dot Matrix Graphic LCD
The TOSHIBA T6K34 is a row (common) driver for a small-to-medium-sized dot matrix graphic LCD. The T6K34 has 168 outputs for LCD driver signals (common). The T6K34 contains a power supply circuit with electronic volume enabling the LCD to be driven by a single power supply. Thus, in combination with a T6K33/S6B0021 (by Samsung) segment driver, the T6K34 can be used to implement a low-power LCD system without the need for a separate power supply IC.
Unit: mm Lead Pitch T6K34 IN OUT
Please contact Toshiba Agents for each Packaging Outline Dimensions.
Features
* * * * * * * * * LCD drive outputs: 168 common outputs Operating voltage: VDD = 1.8 V~3.3 V, VIN = 2.7 V~3.6 V (VDD VIN) LCD drive voltage: 28.8 V (max) Booster circuit: VIN x (-6) max Contrast control: 64 steps (max) Partial display function CMOS process Package: Bump chip (COF), TCP (tape carrier package) Low power consumption: ISS = 225 A (typ.) ......... Design target Conditions: VDD = VIN = 3.0 V, using x5 booster, LCD non-leaded, Ta = 25C, 1/168 duty, 1/6 bias, PCK = 15 kHz, contrast = 20H * Voltage regulator: Temperature coefficient = -0.0%/C (typ.) 0.04%/C
TCP (Tape Carrier Package)
1
2002-04-03
T6K34
RESTRICTIONS ON PRODUCT USE
000707EBE
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Polyimide base film is hard and thin. Be careful not to injure yourself on the film or to scratch any other parts with the film. Try to design and manufacture products so that there is no chance of users touching the film after assembly, or if they do , that there is no chance of them injuring themselves. When cutting out the film, try to ensure that the film shavings do not cause accidents. After use, treat the leftover film and reel spacers as industrial waste. * Light striking a semiconductor device generates electromotive force due to photoelectric effects. In some cases this can cause the device to malfunction. This is especially true for devices in which the surface (back), or side of the chip is exposed. When designing circuits, make sure that devices are protected against incident light from external sources. Exposure to light both during regular operation and during inspection must be taken into account. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
2
2002-04-03


▲Up To Search▲   

 
Price & Availability of T6K34

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X